SMPS Battery Charger BCS2420SR5
Function
- The SMPS Based Battery Charger features a switching mode control design.
- It charges batteries using Constant Current (CC) and Constant Voltage (CV) modes.
- The charger protects against overvoltage and overcurrent.
- User-friendly operation with features like input surge current limiting and low ripple & noise.
- LED indications for mains power, float, boost, and battery reverse.
- Compact and detachable design.
- Compatibility with lead-acid batteries (Tubular & SMF-VRLA) ranging from 7 AH to 120 AH.
- Battery voltage of 24 Volts.
- Charging cut-off of 14.5 volts +/- 0.2 volt.
- Charger current of 20 Ampere per station.
- Current set pot for adjusting charging current.
- Protections include overcharging with auto float/boost selection, battery reverse protection, soft start, short circuit protection, overcurrent protection, and overvoltage cut-off protection.
- Additional protections include AC surge protection MOV and AC input fuse.
- Display with three-digit output voltage (with auto-scrolling/hold) and charging current.
- LED indications for overvoltage, overload, mains, float, boost, and battery reverse.
- Efficiency of at least 75%.
- 1.5-meter 3-core input cable with a 3-pin molded plug.
- 1.5-meter 2.5 mm red & black charging cable with clip.
- Dimensions of 230 x 190 x 125 mm.
- Weight of 1.8 kg (nett.) or 2.1 kg (gross).
Description
Baid Power Services Pvt. Ltd. (BPS) makes different types of Switched Mode Power Supply (SMPS Power Supply) SMPS Battery Charger BCS2420SR5. BPS Make SMPS Battery Chargers- are made to suit different battery voltages and different capacities. These are compact, reliable, and cost-effective solutions for charging different types of batteries.
BPS Make SMPS Battery Charger with digital display – BCS2420SR5 is designed for charging 12 Volt battery with 10 Amps. It is compact with a built-in digital display for Volt and Amp. It has 3 pin 5 Amps mains cord and alligator clips for battery charging. Input AC voltage range is 160-270 Volt AC. With the current limit potentiometer, it is suitable to charge various types of batteries from 7Ah to 120 Ah. A deep-discharged battery can be revived /charged by this charger.
It is a highly reliable very lightweight charger suitable for portable use and battery dealers/ Charging points/
Service stations/ Generators and automobile charging, etc.
It is a highly reliable very lightweight charger suitable for portable use and battery dealers/ Charging points/
Service stations/ Generators and automobile charging, etc.
It is most suitable for electrical panels with DC sources like AMF panels and automotive batteries. For different applications and different voltage and current ratings, please mail your requirements.
HIGH-EFFICIENCY LOW PROFILE CHARGER with DIGITAL METERING
Specification:
| AC Input | : 160 to 270 Volt AC 1 Phase 50 Hz. |
| DC Output | : 3 Phase 4 wire |
| -Float Mode | : 13.5 V |
| -Boost Mode | : 14.5 V |
| Charging current | : 20 Amps (max.) |
| Withstand Voltage | : I/P-O/P-3kV |
| Line Regulation | : +/- 2% on full load |
| Load Regulation | : On main of +/- 2% |
| Working Temperature | : 10~60 Deg C |
| Efficiency | : >85% typical @ full rated load |
