SMPS BASED BATTERY CHARGER BCS2410SR4
Features:
• Precise CC/CV control for smooth charging
• Wide Input range (85~265VAC,50Hz)
• Undervoltage and Overvoltage protection
• Overload and Short circuit protection
• Low working temperature.
• Input surge current limiting.
• Ultra compact power supply.
• Industrial grade components.
• Low Ripple & Noise.
• Soft start.
• High Efficiency.
• Onboard EMI/RMI filter
• Over Temp Shutdown
• Reliable and cost-efficient.
• Screw/jack-type connectors
• Adjustable Output Voltage +/- 10% (Sel. models)
Description
Function:
BPS Make SMPS Battery Charger– BCS2410SR4 is designed for charging 24 Volt battery @ max 10 Amps. It is most suitable for electrical panels with DC sources like AMF panels and automotive batteries. It is compact ( 300 mm x 90 mm x 220 mm) and panel mountable. It has a detachable connector for easy wiring and replacement. input AC voltage range is 180-260 Volt and DC Output is 26.5-28.5 V for charging 24V. battery.
The charger has an auto Boost/ Float selection. If the connected battery draws current over 1 Amp, it starts the battery with Boost mode till the battery reaches 28.5 V. After reaching 28.5 V. it will be shifted to Float mode with 26.5 V thus keeping the battery under Float mode. It has protection for overload, Battery Reverse connection & Over Temperature protection.
Specification
| AC Input | : 180-260V AC |
| DC Output | : -Float Mode: 26.5 V -Boost Mode: 28.5 V |
| Charging current: | 10 Amps (max.) |
| Over Voltage | : set at 125% (+/-5%) of output |
| Withstand Voltage | :I/P-O/P : 3Kv |
| Line Regulation | :+/- 1% on full load |
| Load Regulation | :on main of +/- 1% |
| Working Temperature | :10~60 Deg. C. |
| Efficiency | :>85% typical @ full rated load |
| Safety Standard | : to comply with UL1950, IEC950 |
| Fusing | : through MOR/Glass fuse |
| Protection | : Overload, Overvoltage & Short Circuit Protected. |
“HIGH-EFFICIENCY LOW PROFILE CHARGER “
FEATURES:-
| Switching Mode Control-based Design | |
| Charges batteries with CC/ CV mode. | |
| Over Voltage & Current Protection. | |
| User-Friendly Operation. | |
| Input Surge current limiting. | |
| Low Ripple & Noise. | |
| Over Temperature Shutdown. | |
| LED indication Protections. | |
| – Over Voltage | |
| – Over Load | |
| – Mains | |
| – Float | |
| – Boost | |
| – Battery Rev. | |
| Potential free contact for fault indication. | |
| Compact, detachable connector and panel | |
| mountable |
